The Wonky Weaving Project

This has been so exciting and I love projects that emerge and develop as they grow.  We are working in Maybole, South West Scotland.  I was asked to do a weaving project to celebrate the town’s 500th anniversary as a Borough.

The weaving on one of the eight rigid heddle looms

The organisers were enthusiastic about the idea of a weaving project because this like many, was a weaving town. They wove Ayrshire blankets here and there were also many home weavers if you go further back.

But get this: the weaving riots in Maybole were just about the worst anywhere. Far more so than the oft talked about Paisley riots.  The riots were about mechanisation and factories destroying the livelihoods of home weavers. Difficult times.

So the group involved in this project  wanted to learn to weave, create  a wall hanging and learn a tiny bit of history at the same time.  And they have been amazing.  Only two had ever woven before.  They range in ages from 14 to 80-something and only a couple really knew each other. Weaving has brought them together.

The weaving is all done and now needs to be put together.  We did it on ‘rigid heddle’ looms but pretty much any loom will do, including a frame loom like our very economical Create With Fibre midi frame looms of course.

I call it ‘tapestry type’ weaving. It is not true tapestry, you can see the warp in places especially when we add those lovely bits of curly fleece.  Far easier and faster too.  We created slopes, curves  and texture and somehow the eye sees a landscape. And ‘wonky’ because of all those curves and wonky bits of course!

The finished weaving will now be backed and hung

We will add tiny needle felted sheep and boots now. Boots because Maybole was a boot making town too.

Weave, weave, weave…

Right now, weaving is the new black.  So many people want to learn.   So here is a spot of advice: don’t buy the largest loom you can find, thinking it will ‘do you’ for longer and save you buying another. 90% odds that not only will you have no dining room any longer (unless you have dinner round it) you will also rarely if ever warp it up ready to weave.  It is too daunting.  And my take on it is this: you can weave pretty much anything on a ‘rigid heddle’ loom.

A folding Rigid Heddle Loom

It will fit in a cupboard. You can sit in a chair and weave with it propped up on a windowsill, they are designed like that,  and simply weave panels if you want something wider.

The range of patterns that can be done is awesome.  Check out The Weavers Idea book by Jane Patrick.  It and other books especially for rigid heddle weaving are what you need.  Sarah Howard wrote a lovely book called ‘Wear Your Weaving’ which shows how to create garments using narrow panels.  

And if you just want to have a go, you can even weave around a cardboard box.  We have a FREE e-course ‘5 days to become a weaver’ which shows you how.   Check it out here and get our free e-zine at the same time.   Https://createwithfibre.co.uk

Hubby has been making our newest products, the ‘Dinky Loom’ and Midi Loom.  They enable you to do the simplest of weaving with tiny scraps of leftover yarn. I am making squares for a woven jacket.

Squares woven on the Dinky Loom

They are so quick to do and portable enough to take anywhere.

The dinky loom in action

 

 

Stash busting special

Stash busting, de-cluttering and dieting seem to be seasonal phenomena.

Here’s how it goes.  Binge eat/buy in December then shed the excess £s/lbs January to March.

In other words, our hard earned cash eventually ends up in the bin or charity shop.  Duh.  And it is hard to value things you feel guilty about. So the ‘punishment’ is to say ‘I am not buying any more fibre or yarn until I have used this lot up.’

Ditch the guilt though, there is a reason why you have not used it. You don’t like it, don’t know how to use it or are scared you will ‘spoil’ it.

The money is gone and guilt will not bring it back.  So just spluge and have fun with it. A freeing experience that will liberate your fibre and yarn work and unstick you.  Try these strategies:

  1. Give it to someone who can use it. Then it is no longer wasted.
  2. Use it with gay abandon, randomness and don’t worry what matches.  Intersperse with one or more grey tones to bring it all together but don’t bother what clashes it will add interest.
  3. If the colours really don’t go,  put it all in a dyepot together.  Add some blue, grey or black dye and it will all coodinate beautifully.
  4. Weaving is great for using up yarns fast. Use a grey, brown or black warp to bring the colours together.  A fine warp combined with wefts of different colours and textures works well.
Amazed how far these leftover yarns went. Still enough for more mug mats…

 

 

Eight shiny new weavers…

Saturday was the Scottish Smallholders ‘learn to weave’ day at the Carrick Centre Maybole, Ayrshire Scotland.

What an enthusiastic bunch of people and what lovely weaving. It is great when folks just plunge in and have fun with the colour and texture. I always get design ideas from what people do, especially on beginners courses.

  1. And now I am planning a further ‘weaving for all’ course, like the one I did in Hawick. This means beginners can come along and so can those with more experience. The more experienced can work individually on whatever they like and this formula works really well.  Several people signed up straight away on Saturday.
The weaving on the looms
Lots of fun and chat

How to warp a rigid heddle loom

The rigid heddle loom is my passion. I get excited about colour and texture and they are ideal for that.  You can create lots of patterns on them too of course.

Warping these looms is relatively simple once you get the hang of it and does not take too long.

First clamp the warping peg to a table. Put a weight on the table if necessary so it does not tip over (hence pig in photo)

Attach warping peg to table

Position the loom with the front facing the peg. Clamp it on too. The distance between the loom and the peg will be the length of the warp, minus about 60cm/2 feet of wastage.

Put the yarn on the floor behind the loom. Tie the end to the back stick. Put the heddle in the ‘neutral’ position in the loom.  This is the middle position, neither up nor down.

Use a reed hook to pull a loop of yarn through the heddle.  Pull on the loose end until it is long enough to drop the loop over the peg.  Do not pull it tight or the warps are likely to pop off the peg or pull it off the table.

Winding the warp round the peg

Pull another loop through the heddle and repeat. Continue till all the slots you want to use are threaded like this.

The slots all have two threads in them at this stage. There are no threads in the holes yet.

Tie a spare bit of yarn round the warps for safety.  Remove them from the peg and cut the end of the loops.

Wind the warp onto the loom, keeping it under tension and as tidy as possible. Insert pieces of paper between each layer of warps as you wind them on. This prevents one layer from embedding itself in other layers, which can make the warp uneven. Pages from magazines or flip chart paper work well.

Engage the ‘elbows’ to tilt the back of the loom up slightly,  if using an Ashford knitters  loom.

Take one of the warps out of each slot in turn and thread it through the neighbouring hole.

Threading the holes in the heddle

Tie the threads to the front stick in groups of four or so. Tie in a single knot first.

Tie the threads round the front stick with a single knot.

Go back along the threads, tightening each group in turn and tying in a half bow. Tightening them all at once like this helps to get an even tension.

Tension the warps and tie each group firmly with a half bow.
The warps tied on to the front stick

Put the heddle into the up or down position.  Insert a piece of folded paper or some card into the ‘shed’ or space between the warps.  Change the heddle position and insert a second piece of card. This card covers the knots when you wind the warp on.

Insert a strip of paper or cardboard into each shed.

Weave a ‘header’ with waste yarn. Do three shots of weaving, leaving loops at the sides. Beat all three shots down together. Repeat this once more.

leaving loops at the sides enables you to pull the header out easily afterwards. This is not part of the weaving, it is there to even out the gaps between the groups of warp threads before you start the actual weaving.

Weaving the header with waste yarn
Beat three shots of the header down at once, then repeat.

You are ready to weave!

All in a day’s work

I have started a new knitting blog, because my old one, on the website, will not link or do rss feeds to Facebook or Ravelry.  Oh dear!
However this one will work in conjunction with my simplicity blog, downshifterdiary where you can find out about our adventures in lifestyle and simple living.

Anyway, today I have been dyeing hanks of yarn for an order.  40 hanks of yarn, actually so I have been in yarn heaven all day. 20 hanks of laceweight and 20 hanks of sock yarn. Now I wish I could knit with all those lovely colours, but need to finish the shawl I am doing out of 7 small shawls to knit by Romi .  This is a fabulous booklet and the patterns have been thoroughly tested.  I have not found any errors in the one I am knitting. 
The laceweight and sock yarn are for sale on my website http://www.createwithfibre.co.uk

just while I remember, here are some photos from our class ‘Improve Your Spinning’ at the Association of Weavers Spinners & Dyers summer school in August 2011.

colour blending results

all lined up and ready to go…
hard at work

a bit knackered?
our display of work